
Tóm tắt tài liệu kỹ thuật
MEMCOR CPll Ultrafiltation System
PDF datasheet mirror for MEMCOR CPll Ultrafiltation System (MEMCOR Ultrafiltration). Verify with OEM before design.
Summary
Product identification
The MEMCOR® CP II Ultrafiltration System is a pressurised, pre-engineered membrane system featuring a modular building-block configuration and ultra-compact footprint. It utilizes enhanced PVDF UF membrane technology.
Key components include:
- MEMCOR® CP II system
- L40N PVDF UF membrane module
- MemRACK™ array (combines feed, filtrate, air, and waste headers with membrane housings)
Operating limits
- Membrane pore size: Rejects particles greater than 0.04 µm.
- Backwash duration: 90 seconds.
- MemRACK™ array capacity: Flexible up to 28 modules per array.
Product water
The system's UF membrane technology rejects particles greater than 0.04 µm from the feed water.
Mechanical / hydraulic
The MEMCOR® CP II system is designed for enhanced performance and simplified operations:
- Membrane Technology: Utilizes durable L40N PVDF UF membrane modules.
- System Configuration: Pressurised, pre-engineered system with a modular building-block design.
- Footprint: Features an ultra-compact footprint, with self-supporting MemRACK™ arrays reducing membrane array footprint by up to 50% compared to previous MEMCOR system offerings. MemRACK arrays also fit in standard shipping containers.
- MemRACK™ Array: Fully assembled, integral MemRACK array with optimized system hydraulics for long-term process stability. It integrates feed, air, filtrate, and waste headers into a single, cost-saving component.
- Maintenance: Allows for in-place maintenance with multiple access routes to the L40N modules from the side or top of the MemRACK array.
- Cleaning: Supports options for high and low solids backwash timed at routine intervals, and regularly timed chemical cleaning.
- Scalability: MemRACK arrays can be manifolded together to form functional units, allowing scalability for a wide range of plant capacities.
Disclaimer: The information provided is extracted from the OEM datasheet. This summary may not include all figures, footnotes, or the latest revisions. Contractual data must always match the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.