Quay lại Hydranautics UF Modules
Hydranautics logo

Tóm tắt tài liệu kỹ thuật

HYDRAcap-60-LD

PDF datasheet mirror for HYDRAcap-60-LD (Hydranautics UF Modules). Verify with OEM before design.

Summary

Product identification

  • Product Name: HYDRAcap®60-LD
  • Type: Capillary Ultrafiltration Module
  • Configuration: Capillary Ultrafiltration Module
  • Membrane Polymer: Hydrophilic Polyethersulfone
  • Pore size: 0.02 micron
  • Certifications: NSF61, CDPH, and ETV-NSF Verification

Performance

  • Filtrate Flow: 7.8 – 19 gpm (1.8 – 4.3 m³/h)
  • Filtrate Turbidity: ≤ 0.07 NTU
  • Virus removal: ≥ 4 log
  • Bacteria removal: ≥ 4 log

Operating limits

  • Maximum Applied Feed Pressure: 73 psig (5 bar) (at 68°F / 20°C)
  • Maximum Transmembrane Pressure: 20 psig (1.4 bar)
  • Maximum Backwash Transmembrane Pressure: 20 psig (1.4 bar)
  • Instantaneous Chlorine Tolerance: 100 ppm (for 15 minutes or less)
  • Instantaneous Hydrogen Peroxide Tolerance: 200 ppm (for 15 minutes or less)
  • Maximum Chlorine Exposure: 100,000 ppm-hrs
  • Maximum Instantaneous Feed Turbidity: 200 NTU
  • Maximum Operating Temperature: 104 F (40 C)
  • pH Operating Range: 4.0 - 10.0
  • Cleaning pH Range: 1.5 – 13.0

Mechanical / hydraulic

  • Nominal Membrane Area: 323 ft² (30 m²)
  • Fiber Dimensions: ID 0.047” (1.2 mm), OD 0.08” (2.0 mm)
  • Typical Filtrate Flux Range: 35 – 85 gfd (59 – 145 l/m²/h)
  • Operating Mode: Inside to Outside Filtration, Direct flow or Crossflow
  • Backwash Flux: 100 – 150 gfd (170 – 255 l/m²/h)
  • Backwash Duration: 30 – 60 seconds
  • Backwash Frequency: 20 – 60 minutes
  • Chemical Enhanced Backwash Frequency: 0 – 4 times per day
  • Chemical Enhanced Backwash Duration: 1 – 30 minutes
  • Dimensions:
    • A: 63” (1600 mm)
    • B: 66 1/8” (1680 mm)
    • C: 67 1/4” (1708 mm)
  • Pipe connections: 2” Victaulic
  • Weight, ave.: 97 lbs. (44 kg) (shipping weight including 1L of a 0.95% solution of sodium bisulfite preservative)

Chemicals

  • Disinfection Chemicals: NaOCl, H₂O₂, ClO₂, or NH₂Cl
  • Cleaning Chemicals: NaOH, HCl, H₂SO₄, or Citric Acid

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.