Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

Liqui-Flux MF PP B42 LF

PDF datasheet mirror for Liqui-Flux MF PP B42 LF (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Module Name: 3M™ Liqui-Flux™ Membrane Module MF-PP Series, Type B42
  • Module Characteristics:
    • Membrane Surface Area: 6.4 m²
    • Membrane Type: MF-PP
    • Membrane Material: Polypropylene
    • Pore Size (nominal): 0.2 µm
    • Capillary Inner Diameter: 1.2 mm
    • Operating Mode: Cross-Flow Filtration Inside-Out
    • Housing Material: Polysulfone
    • Potting Material: Polyurethane
  • Intended Use: Vinegar Filtration
  • Regulatory Compliance: According (EU) 10/2011 & (EC) 1935/2004 Filtration Modules

Operating limits

  • Maximum Housing Pressure at Temperature: 4.0 bar at 20°C
  • Maximum Transmembrane Pressure Inside - Outside:
    • 2.5 bar at 20°C
    • 1.5 bar at 40°C
  • Maximum Back Flush Pressure Above Outlet Pressure:
    • 1.0 bar at 20°C
    • 0.5 bar at 40°C
  • pH-range During Operation: 2 – 10
  • pH-range During Short Term Cleaning: 2 – 13
  • Cleaning Conditions:
    • Maximum Inlet Pressure at Temperature: 1.0 bar at 50°C

Mechanical / hydraulic

  • Dimensions (nominal):
    • 1092 mm (42.99 in)
    • 981 mm (38.62 in)
    • 134 mm (5.28 in)
  • Connections:
    • Connection Concentrate: Screw connection 6" NPSM
    • Connection Filtrate: Screw connection 1½" NPSM
  • Inlet Liquid Volume Flow (for velocity of 1 m/s): ~11 m³/h

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.