Tóm tắt tài liệu kỹ thuật
Liqui-Flux MF PP B41 LF
PDF datasheet mirror for Liqui-Flux MF PP B41 LF (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.
Summary
Product identification
- Product Name: 3M™ Liqui-Flux™ Membrane Module MF-PP Series, Type B41
- Intended Use: Wine Filtration
Mechanical / hydraulic
- Nominal Dimensions:
- 125 mm (4.92)
- 1050 mm (41.34 in)
- 900 mm (35.43 in)
- Housing Material: Stainless steel / PVC-U
- Potting Material: Polyurethane
- Connection Concentrate: Flange connection 6.6" DIN 32676
- Connection Filtrate: Clamp connection 2" DIN 32676
- Capillary Inner Diameter: 1.2 mm
Operating limits
- Maximum Housing Pressure: 16.0 bar
- Maximum Transmembrane Pressure Inside - Outside:
- 2.0 bar at 20°C
- 1.0 bar at 40°C
- Maximum Back Flush Pressure Above Outlet Pressure:
- 1.0 bar at 20°C
- 0.5 bar at 40°C
- Inlet Liquid Volume Flow (for velocity of 1 m/s): ~17 m³/h
- pH-range During Operation: 2 – 10
- pH-range During Short Term Cleaning: 2 – 13
- Maximum Inlet Pressure at Temperature (Cleaning): 1.0 bar at 50°C
Membrane characteristics
- Membrane Surface Area: 15.0 m²
- Membrane Type: MF-PP
- Membrane Material: Polypropylene
- Pore Size (nominal): 0.2 µm
- Operating Mode: Cross-Flow Filtration Inside-Out
Regulatory Compliance
- According (EU) 10/2011 & (EC) 1935/2004
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.