Tóm tắt tài liệu kỹ thuật
Liqui-Flux MF PP B27 LF
PDF datasheet mirror for Liqui-Flux MF PP B27 LF (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.
Summary
Product identification
- 3M™ Liqui-Flux™ Membrane Module MF-PP Series, Type B27
- Intended Use: Wine Filtration
Module Characteristics
- Membrane Surface Area: 6.5 m²
- Membrane Type: MF-PP
- Membrane Material: Polypropylene
- Pore Size (nominal): 0.45 µm
- Capillary Inner Diameter: 1.7 mm
- Operating Mode: Cross-Flow Filtration Inside-Out
- Housing Material: Polysulfone
- Potting Material: Polyurethane
Mechanical / Hydraulic
- Connection Concentrate: Screw connection 6“ NPSM
- Connection Filtrate: Screw connection 1½” NPSM
- Nominal Dimensions:
- 1092 mm (42.99 in)
- 981 mm (38.62)
- 134 mm (5.28 in)
Operating Limits
- Maximum Housing Pressure at Temperature: 4.0 bar at 20°C
- Maximum Transmembrane Pressure Inside - Outside:
- 2.5 bar at 20°C
- 1.5 bar at 40°C
- Maximum Back Flush Pressure Above Outlet Pressure:
- 1.0 bar at 20°C
- 0.5 bar at 40°C
- Inlet Liquid Volume Flow (for velocity of 1 m/s): ~10 m³/h
- pH-range During Operation: 2 – 10
- pH-range During Short Term Cleaning: 2 – 13
- Maximum Inlet Pressure at Temperature (Cleaning Conditions): 1.0 bar at 50°C
Regulatory Compliance
- According (EU) 10/2011 & (EC) 1935/2004
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.