Tóm tắt tài liệu kỹ thuật
Liqui-Flux MF PP B171 LF
PDF datasheet mirror for Liqui-Flux MF PP B171 LF (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.
Summary
Product identification
- 3M™ Liqui-Flux™ Membrane Module MF-PP Series
- Type B171
Applications
- Intended Use: Wine Filtration
Module Characteristics
- Membrane Surface Area: 9.1 m²
- Membrane Type: MF-PP
- Membrane Material: Polypropylene
- Pore Size (nominal): 0.45 µm
- Capillary Inner Diameter: 1.7 mm
- Operating Mode: Cross-Flow Filtration Inside-Out
- Housing Material: Stainless steel / PVC-U
- Potting Material: Polyurethane
Mechanical / Hydraulic
- Nominal Dimensions:
- 1050 mm (41.34 in.)
- 900 mm (35.43 in.)
- 125 mm (4.92 in.)
- Connections:
- Concentrate: Flange connection 6.6“ DIN 32676
- Filtrate: Clamp connection 2“ DIN 32676
- Pressures:
- Maximum Housing Pressure: 16.0 bar
- Maximum Transmembrane Pressure Inside - Outside:
- 2.5 bar at 20°C
- 1.5 bar at 40°C
- Maximum Back Flush Pressure Above Outlet Pressure:
- 1.0 bar at 20°C
- 0.5 bar at 40°C
- Flow Rate:
- Inlet Liquid Volume Flow (for velocity of 1 m/s): ~15.0 m³/h
Operating limits
- pH-range During Operation: 2 – 10
- pH-range During Short Term Cleaning: 2 – 13
Cleaning Conditions
- Maximum Inlet Pressure at Temperature: 1.0 bar at 70°C
Regulatory Compliance
- According (EU) 10/2011 & (EC) 1935/2004
Disclaimer
This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.