Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

Membrana Plasmaphan P1LX

PDF datasheet mirror for Membrana Plasmaphan P1LX (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: PLASMAPHAN®
  • Type: P1 LX
  • Document Reference: Sheet No. 431/9028/000 of 03/16 (supersedes 431/9028/000 of 11/13)
  • Membrane Type: Capillary membrane
  • Intended Use: Plasmapheresis

Chemical composition

  • Polymer: Polypropylene
  • Residual oil content: ≤ 100 ppm

Physical properties

  • Wall thickness: 150 µm ± 25 µm
  • Inner diameter: 330 µm ± 50 µm
  • Tensile strength: ≥ 60 cN
  • Elongation at break: ≥ 60 %

Membrane performance characteristics

  • Transmembrane flow (Isopropylalcohol, 37°C): 9.3 ml/[min x cm² x bar] ± 2.3 ml/[min x cm² x bar]
  • Maximum pore size (calculated from BP): 0.47 µm + 0.07 µm / - 0.06 µm
  • Bubble point (Isopropylalcohol, 23°C): 1.31 bar + 0.19 bar / - 0.18 bar

Mechanical / hydraulic

  • Available make-up configurations: Bundles (customer specified)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.