Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

Membrana MicroPES TF10 iv

PDF datasheet mirror for Membrana MicroPES TF10 iv (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: MicroPES® Type TF10 iv
  • Intended Use: Infusion therapy
  • Membrane Type: Capillary membrane
  • Document Revision: Sheet No. 425/9061/000 of 03/16, supersedes 425/9061/000 of 11/13

Chemical composition

  • Polymer: Polyethersulfone

Mechanical / hydraulic

  • Wall thickness: 100 ± 25 µm
  • Inner diameter: 300 ± 40 µm
  • Tensile strength: ≥ 50 cN
  • Elongation at break: ≥ 30 %

Membrane performance characteristics

  • Transmembrane flow (water, 25°C): ≥ 35 ml/[min x cm² x bar]
  • Maximum pore size (calculated from BP): 0.5 ± 0.1 µm
  • Bubble point (Isopropylalcohol, 23°C): 1.22 +0.31 / -0.20 bar

Available configurations

  • Single-thread spools

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.