Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

Membrana MicroPES 5F M

PDF datasheet mirror for Membrana MicroPES 5F M (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Type: Flat membrane
  • Model: MicroPES® Type 5F M
  • Document Reference: Sheet No. 427/0092/000 of 03/16 (supersedes 427/0092/000 of 11/13)
  • Chemical Composition: Polyethersulfone polymer

Physical and Mechanical Properties

  • Thickness: 110 ± 10 µm
  • Tensile Strength:
    • Longitudinal: ≥ 900 cN/15 mm
    • Transversal: ≥ 800 cN/15 mm
  • Elongation at Break:
    • Longitudinal: ≥ 25 %
    • Transversal: ≥ 30 %
  • Burst Pressure: ≥ 1 bar

Membrane Performance Characteristics

  • Transmembrane Flow (water, 25°C): ≥ 90 ml/[min x cm² x bar]
  • Maximum Pore Size (calculated from BP): ≤ 1.01 µm
  • Bubble Point (water, 25°C): 2.3 ± 0.25 bar

Operating Conditions

  • Change of Length (steam, 121°C): ≤ 3 %

Available Configurations

  • Rolls

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.