Tóm tắt tài liệu kỹ thuật
3M MicroPES 12F iv
PDF datasheet mirror for 3M MicroPES 12F iv (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.
Summary
Product identification
- Product Line: 3M™ Flat Membrane
- Series Type: MicroPES™ Series Type 12F iv
Membrane Performance Characteristics
- Bubble point (in water): 0.84 ± 0,16 bar (12.2 ± 2.3 psi)
- Transmembrane flow (water, 25 °C): ≥ 360 ml/(min cm² bar) (≥ 23060 ml/(min ft² psi)) (≥ 160.14 ml/(min in² psi))
- Retention of bacteria (Candida albicans): ≥ 7 log/cm² reduction value
Physical Properties
- Thickness: 110 ± 10 μm (4.3 ± 0.4 mil)
- Tensile strength:
- Longitudinal: ≥ 900 cN/15 mm
- Transversal: ≥ 800 cN/15 mm
- Elongation at break:
- Longitudinal: ≥ 25%
- Transversal: ≥ 30%
- Change of length (steam, 121 °C): ≤ 3%
Chemical Composition
- Polymer: Polyethersulfone
- Wetting property: Hydrophilic
Available Make-up Configurations
- Rolls
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF. Contractual data must always match the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.