Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

3M-MF-PP-S6 / 4

PDF datasheet mirror for 3M-MF-PP-S6 / 4 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • 3M™ Capillary Membrane MF-PP Series, Type S6/4

Physical Properties

  • Wall thickness: 500 ± 70 µm (19.7 ± 2.8 mil)
  • Inner diameter: 1700 ± 200 μm (66.9 ± 7.9 mil)
  • Burst pressure: ≥ 8 bar (≥ 116 psi)
  • Implosion pressure: ≥ 4 bar (≥ 58 psi)

Membrane Performance Characteristics

  • Bubble point (in isopropyl alcohol, 23 °C): ≥ 0.7 bar (≥ 10.2 psi)
  • Transmembrane flow (isopropyl alcohol, 23 °C): ≥ 3.5 ml/(min cm² bar) (≥ 224.2 ml/(min ft² bar)) (≥ 1.6 ml/(min in² bar))

Available Make-up Configurations

  • Bundles (600 capillaries, length = 1300 mm)

Chemical Composition

  • Polymer: Polypropylene
  • Residual oil content: ≤ 100 ppm
  • Wetting property: Hydrophobic

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.