Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

3M-MF-PP 300 / 1200

PDF datasheet mirror for 3M-MF-PP 300 / 1200 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • 3M™ Capillary Membrane MF-PP Series, Type 300/1200

Physical Properties

  • Wall thickness: 300 ± 35 µm (11.8 ± 1.4 mil)
  • Inner diameter: 1175 ± 75 μm (46.3 ± 3 mil)

Operating limits

  • Burst pressure: ≥ 5 bar (≥ 72.5 psi)
  • Implosion pressure: ≥ 3 bar (≥ 43.5 psi)

Membrane Performance Characteristics

  • Bubble point (in isopropyl alcohol, 23 °C): ≥ 0.96 bar (≥ 13.9 psi)
  • Transmembrane flow (isopropyl alcohol, 23 °C): ≥ 4.2 ml/(min cm² bar) (≥ 269 ml/(min ft² bar)) (≥ 1.9 ml/(min in² bar))
  • Note: All specifications are based on 3M internal test procedures.

Chemical Composition

  • Polymer: Polypropylene
  • Residual oil content: ≤ 200 ppm
  • Wetting property: Hydrophobic

Available Make-up Configurations

  • Bundles (customer specified)

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.