Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

3M MF-PP 150 / 330

PDF datasheet mirror for 3M MF-PP 150 / 330 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • 3M™ Capillary Membrane MF-PP Series, Type 150/330

Membrane Performance Characteristics

  • Bubble point (in isopropyl alcohol, 23 °C): ≥ 1.1 bar (≥ 16 psi)
  • Transmembrane flow (isopropyl alcohol, 23 °C):
    • ≥ 7.5 ml/(min cm² bar)
    • ≥ 480.41 ml/(min ft² psi)
    • ≥ 3.34 ml/(min in² psi)

Physical Properties

  • Wall thickness: 150 ± 25 μm (5.9 ± 1.0 mil)
  • Inner diameter: 330 μm ± 50 μm (13.0 mil ± 2.0 mil)
  • Tensile strength: ≥ 60 cN
  • Elongation at break: ≥ 90%

Chemical Composition

  • Polymer: Polypropylene
  • Residual oil content: ≤ 100 ppm
  • Wetting property: Hydrophobic

Available Make-up Configurations

  • Bundles (customer specified)

Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or recent revisions. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.