Tóm tắt tài liệu kỹ thuật
Membrana Oxygenation X30 / 150 MM
PDF datasheet mirror for Membrana Oxygenation X30 / 150 MM (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.
Summary
Product identification
3M Membrana Oxygenation Membrane Series, Type X30-150
Chemical Composition
- Polymer: Polypropylene
Physical Properties
- Wall Thickness: 20 - 26 µm
- Outer Diameter: 198 ± 5 µm
- Inner Diameter: 152 ± 11 µm
- Outer Diameter Shape Ratio: ≤ 1.2
- Bubble Point: ≥ 160 psi
- Tensile Break Strength: ≥ 100 g/fil
- Elongation at Break: ≥ 50 %
- Shrinkage, Axial Direction (unrestrained): ≤ 5 %
Membrane Performance Characteristics
- Resistance to air flow: 35 – 95 Gurley sec.
Available Make-up Configurations
- Six filament spools
- Undistorted and distorted single layer mats
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. For contractual purposes, all data must be verified against the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.