Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

Membrana MicroPES TF10

PDF datasheet mirror for Membrana MicroPES TF10 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: MicroPES®
  • Membrane Type: Capillary membrane
  • Model: TF10
  • Polymer: Polyethersulfone
  • Datasheet Revision: 433/0091/000 of 03/16 (supersedes 433/0091/000 of 11/13)

Mechanical / Hydraulic

  • Wall thickness: 100 ± 25 µm
  • Inner diameter: 300 ± 40 µm
  • Tensile strength: ≥ 50 cN
  • Elongation at break: ≥ 30 %
  • Available make-up configurations:
    • Single-thread spools
    • Bundles (customer specified)
    • Mats

Operating limits

  • Transmembrane flow (water, 25°C): ≥ 35 ml/[min x cm² x bar]
  • Maximum pore size (calculated from BP): 0.5 ± 0.1 µm
  • Bubble point (Isopropylalcohol, 23°C): 1.22 bar (+0.31 / -0.20 bar)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. For contractual purposes, always refer to the complete OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.