Quay lại 3M Liqui-Flux Ultrafiltration
3M logo

Tóm tắt tài liệu kỹ thuật

DuraPes 600

PDF datasheet mirror for DuraPes 600 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: 3M™ Membrana™ DuraPES®
  • Membrane Type: Hydrophilic Flat Membrane, Type 600
  • Intended Use: Microfiltration
  • Available Make-up Configuration: Rolls
  • Polymer: Polyethersulfone

Membrane Performance Characteristics

  • Bubble point (water, 25 °C): m 2.25 bar (≈32.63 psi) ± 0.35 bar (≈5.07 psi)
  • Transmembrane flow (water, 25 °C):
    • ≥ 160 ml/(min cm² bar)
    • ≥ 10249.24 ml/(min sq ft psi)
    • ≥ 71.18 ml/(min sq in psi)
  • Retention of bacteria (Sacc. cerevisiae): ≥7 log reduction value

Mechanical / hydraulic

  • Thickness: m 140 µm (≈5.512 mil) ± 10 µm (≈0.394 mil)
  • Tensile strength:
    • longitudinal ≥550 cN / 15 mm
    • transversal ≥450 cN / 15 mm
  • Elongation at break:
    • longitudinal ≥10%
    • transversal ≥15%
  • Change of length (steam, 121 °C): ≤ 3%
  • m = mean value

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual purposes, all data must be verified against the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.