Quay lại Veolia Filtration
Veolia logo

Tóm tắt tài liệu kỹ thuật

XPleat GF T

Engineering summary from PDF text extraction for XPleat GF T. Verify every value with the OEM datasheet.

Summary

Product Identification

The XPleat GF-T Filters are cartridge filters designed and manufactured for resistance to a wide range of chemical solutions.

Typical Applications

  • For general water services
  • For fine process fluid filtration
  • For processes that require excellent flow rates

General Properties

XPleat GF-T filters are available in nominal and absolute micron ratings.

  • Nominal micron ratings: 0.2, 0.45, 1.0, 3.0, 10.0 µm
  • Absolute micron ratings: 1.0, 2.0, 4.0, 8.0, 15.0 µm

Materials of Construction

  • Filter Media: Glass microfiber
  • Media Support: Polyester
  • Components: Polyester
  • Sealing: Thermal Bonding

Mechanical / Hydraulic

  • Outside Diameter: 2.75” (70 mm)
  • Inside Diameter: 1.25” (31 mm)
  • Effective Filtration Area: 3.4 ft² (1.32 m²)
  • Lengths: 10, 20, 30, 40 inches (25.4, 50.8, 76.2, 101 cm)

Operating Limits

  • Maximum Forward Differential Pressure: 60 psid (4.14 bar)
  • Maximum Reverse Differential Pressure: 30 psid (2.07 bar)
  • Maximum Operating Temperature: 180ºF (82ºC) at 10 psi (0.69 bar) in water

Flow Performance

Flow performance data for clean water is referenced as being available in a table (Table 4) within the full datasheet, based on a 10" length filter. See the official PDF for exact tabulated values.

Ordering Information

The product designation is XPLT-T GF. Filters are available with the following configurations:

  • Micron Rating (Nominal µm / Absolute µm):
    • 0.2 / 1.0
    • 0.45 / 2.0
    • 1.0 / 4.0
    • 3.0 / 8.0
    • 10.0 / 15.0
  • Length inches (cm):
    • 10 (25.4)
    • 20 (50.8)
    • 30 (76.2)
    • 40 (101.6)
  • End #1 Adapter: OEG (Open End Gasket), 213, 222, 226
  • End #2 Adapter: OEG, 213, FIN, FLT
  • Elastomer Material:
    • B = Buna-N
    • E = EPDM
    • S = Silicone
    • V = Viton
  • Packaging: Xpleat is available in case quantities only, with part numbers reflecting case quantities of six (6). Viton gaskets are available for an additional charge.

An example part number is XPLT-T-GF-0.2-10-222-FIN-E.


Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions found in the complete OEM PDF datasheet. For contractual data, please refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.