Quay lại SUEZ Filtration
SUELogo pending

Tóm tắt tài liệu kỹ thuật

SWRO.Zs

Engineering summary from PDF text extraction for SWRO.Zs. Verify every value with the OEM datasheet.

Summary

Product identification

The SWRO.Z is a Z.Plex technology depth filter engineered specifically for seawater reverse osmosis pretreatment. It is designed to trap particles throughout the media with true graded density for longer filter lifetime. Its melt-bonded exterior ensures no media migration, and it offers very low pressure drop and flow resistance.

Applications:

  • Seawater reverse osmosis pre-filtration for Veolia RO systems and universal equipment.

Operating limits

  • Maximum pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
  • Recommended change-out pressure drop: 20 psid (1.4 bar) @ 77°F (25°C)

Mechanical / hydraulic

  • Ratings: 1, 5 microns (nominal)
  • Inner Diameter (nominal): 1.1 in (2.5 cm)
  • Outer Diameter:
    • Standard: 2.46 in (6.2 cm)
    • Available upon request: 2.36 in (6.0 cm)
  • Lengths:
    • 40 in (101.6 cm)
    • 50 in (127.0 cm)
    • 60 in (152.4 cm)
    • 70 in (177.8 cm)
    • Longer lengths up to 70 in may be available upon request.
  • Materials of Construction:
    • Filter Media: Polypropylene
    • Adapters: Polypropylene
    • Elastomer: Buna, EPDM, Silicone, Viton, Santoprene (flat gasket only)
  • Efficiency Information:
    • Removal efficiency based on a modified ASTM 795 procedure is provided for 1 µm and 5 µm nominal filters.
    • Efficiency of nominal filters varies by application; absolute-rated filters reject at least 99% of particles of the listed micron size. Nominal-rated filters have a wider distribution of pore sizes and rejected particle sizes.

Certifications

  • U.S. FDA 21CFR 177.1520 food contact requirements
  • Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
  • EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
  • USP class VI-121°C Plastics criteria
  • NSF 61 criteria
  • ISO 9001 criteria (filters manufactured under a certified quality management system)

Ordering information

The ordering code for SWRO.Z filters follows a structured format: SWRO.Z [Micron Rating]-[Cartridge Length]-[End #1 Adapter][End #2 Adapter][Elastomer Material].

  • Micron Rating (nominal): 01 (1 µm), 05 (5 µm)
  • Cartridge Length: 40 in (101.6 cm), 50 in (127.0 cm), 60 in (152.4 cm), 70 in (177.8 cm). Longer lengths up to 70 in may be available upon request.
  • Adapter and Elastomer Options: See the official PDF for exact tabulated values for End #1 Adapter, End #2 Adapter, and Elastomer Material options. These columns are optional depending on the desired configuration.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.