Purtrex Plus

Summary

Product identification

The Purtrex Plus is a melt blown depth filter designed for general industrial applications.

Features and Benefits:

• Exceptional value for general applications
• Lower pressure drop and higher dirt-holding capacity
• Fewer change-outs and longer life
• Pure polypropylene construction

Applications:

• General industrial use
• Potable water filtration
• Commercial and residential filtration
• Chemical filtration
• Beverage manufacturing

Micron Ratings (nominal):

• 1 µm
• 3 µm
• 5 µm
• 10 µm

Operating limits

• Maximum pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
• Recommended change-out pressure drop: 25 psid (1.4 bar) @ 77°F (25°C)

Veolia filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application, and users should carefully verify chemical compatibility.

Mechanical / hydraulic

• Inner Diameter (nominal): 1 in (2.5 cm)
• Outer Diameter: 2.5 in (6.4 cm)
• Lengths:
  • 10 in (25.4 cm)
  • 20 in (50.8 cm)
  • 30 in (76.2 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request.

Clean water flow rate information based on a 10 in length filter is provided in a graph in the official PDF. See the official PDF for flow rate curves.

Materials of Construction

• Filter Media: Polypropylene
• Adapters: Polypropylene

Quality and Certifications

Purtrex Plus filters are manufactured under a quality management system certified to meet ISO 9001 standards, with lot codes for traceability.

Certifications include:

• U.S. FDA 21CFR 177.1520 food contact requirements
• Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
• EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
• USP class VI-121'C Plastics criteria
• ISO 9001 criteria
• NSF 61 criteria

Efficiency Information

Removal efficiency based on a modified ASTM 795 test procedure is mentioned, with ratings at various efficiencies (90.0%, 99.0%, 99.9%) for 1 µm, 3 µm, 5 µm, and 10 µm filters. See the official PDF for exact tabulated values regarding removal efficiency. Efficiency of nominal filters varies by application.

Ordering Information

The product series is PXP.Zs. Ordering codes follow a format such as PXP.Zs XX-YY-ZK, where XX is the micron rating, YY is the cartridge length, and ZK refers to adapter types.

• Micron Rating (nominal):
  • 01 = 1 µm
  • 03 = 3 µm
  • 05 = 5 µm
  • 10 = 10 µm
• Cartridge Length:
  • 10 in (25.4 cm)
  • 20 in (50.8 cm)
  • 30 in (76.2 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request.
• End #1 Adapter (optional):
  • X = Standard Plain End (no gasket)
• End #2 Adapter (optional):
  • K = Self Seal Spring
• Elastomer Material: Not available as a configurable option in the ordering table.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror