Datasheet summary
EDR.Z
Engineering summary from PDF text extraction for EDR.Z. Verify every value with the OEM datasheet.
Summary
Product identification
The Absolute High Flow Z* filter is a polypropylene melt-blown depth media filter designed for absolute filtration in a large diameter format. It features a graded density design for enhanced dirt-holding capacity and consistent, reproducible performance.
Key Features:
- Absolute filtration in a large diameter filter format
- Polypropylene melt-blown depth media filter design
- Graded density retains particles throughout the full diameter of the filter
- Enhanced dirt-holding capacity yields quicker upset recovery and less surface binding
- Outperforms most pleated filters
- Easier and less frequent change-outs than conventional standard 2.500 depth filters
- Consistent, reproducible performance and filtration quality
- Lower total cost of filtration operations
- Superior SDI reduction
Applications
- Amine filtration
- Well injection
- Produced water filtration
- Waterflood
- Enhanced oil recovery
Specifications
- Ratings: 15, 25, 40, 70 microns (absolute)
- Inner Diameter:
- 40 in length: 1.6 in (4.1 cm)
- 60 in length: 3.1 in (7.9 cm)
- Outer Diameter: 6.5 in (16.5 cm)
- Lengths:
- 40 in (101.6 cm)
- 60 in (152.4 cm)
Materials of Construction
- Filter Media: Polypropylene
- Adapters: Polypropylene
- Elastomer: EPDM
Operating limits
- Maximum pressure drop:
- 50 psid (3.4 bar) @ 77°F (25°C)
- 35 psid (2.4 bar) @ 160°F (71°C)
- Recommended change-out pressure drop:
- 35 psid (2.4 bar) @ 77°F (25°C)
Efficiency Information
Removal efficiency based on a modified ASTM 795 procedure:
| Micron Rating | Removal Rating (µm) at Various Efficiencies |
|---|---|
| 90.0% | |
| 15 µm | 10.2 |
| 25 µm | 17.9 |
| 40 µm | 26.1 |
| 70 µm | 36.8 |
Clean water flow rate information is available in Graph 1 (for 40 in length filters) and Graph 2 (for 60 in length filters) in the official PDF.
Certifications
- U.S. FDA 21CFR 177.1520 food contact requirements
- Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
- EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
- USP class VI-121°C Plastics criteria
- NSF 61 criteria
- ISO 9001 criteria
Ordering Information
Part Numbers:
| Length | Absolute Micron | Part Number | Description |
|---|---|---|---|
| 40” | 15 | 3146310 | HF.Za 15-40-FSE |
| 25 | 3138124 | HF.Za 25-40-FSE | |
| 40 | 3146282 | HF.Za 40-40-FSE | |
| 70 | 3137940 | HF.Za 70-40-FSE | |
| 60” | 15 | 3155830 | HF.Za 15-60-TSE |
| 25 | 3155716 | HF.Za 25-60-TSE | |
| 40 | 3155739 | HF.Za 40-60-TSE | |
| 70 | 3155852 | HF.Za 70-60-TSE |
Description Key:
- End #1 Adapter:
- F = 226 O-Ring
- T = 338 O-Ring
- End #2 Adapter: S = Closed End with ergonomic handle
- Elastomer Material: E = EPDM
Elastomer Kits:
| Filter | Adaptor Material | Part number | Quantity |
|---|---|---|---|
| 40" (226) | Buna | 3195517 | 803 |
| 40" (226) | Silicone | 3195811 | 803 |
| 40" (226) | Viton² | 3195812 | 803 |
| 60" (338) | Buna | 3195815 | 25 |
| 60" (338) | Silicone | 3195814 | 25 |
| 60" (338) | Viton² | 3195816 | 25 |
² Viton is a registered mark of The Chemours Company. ³ Two (2) required on 226 adapters for each filter.
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions found in the complete OEM PDF datasheet. For contractual data and full product details, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.