
Tóm tắt tài liệu kỹ thuật
R Series Pleated Cartridges
Engineering summary from PDF text extraction for R Series Pleated Cartridges. Verify every value with the OEM datasheet.
Summary
Product identification
R Series Pleated Polyester Cartridges are designed with a pleated structure to maximize dirt-holding capacity. They are versatile, reusable, and feature a durable polyester media that is resistant to bacteria and chemicals.
- Filter Type: Pleated Polyester Cartridges
- Design: Pleated design maximizes dirt-holding capacity and extends time between changes or cleaning.
- Media: Durable, non-woven, and reusable polyester fabric.
- Construction: Media is pleated around a polypropylene core. Ends are immersed in a thermo-setting vinyl plastisol, fusing the components. Overlap seam is sonically welded to reduce internal bypass.
- Surface Area: Standard 9³/₄" length cartridges have more than four square feet of polyester fabric. Big Blue® versions have more than 16 square feet.
- Applications: Suitable for a variety of residential, commercial, and industrial uses.
Materials of construction
- Filter Media: Non-Woven Polyester
- End Caps: Vinyl Plastisol
- Core: Polypropylene
Operating limits
- Temperature Rating: 40–125ºF (4.4–51.7ºC)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Performance data
R Series cartridges are available with nominal 30-micron (R30) and 50-micron (R50) ratings.
| Model | Maximum dimensions | Micron rating (nominal) | Initial ΔP @ Flow rate |
|---|---|---|---|
| R30-478 | 2⁵⁄₈" x 4⁷⁄₈" (67 mm x 124 mm) | 30 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R30 | 2⁵⁄₈" x 9³⁄₄" (67 mm x 248 mm) | 30 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R50 | 2⁵⁄₈" x 9³⁄₄" (67 mm x 248 mm) | 50 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R30-20 | 2⁵⁄₈" x 20" (67 mm x 508 mm) | 30 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R30-BB | 4¹⁄₂" x 9³⁄₄" (114 mm x 248 mm) | 30 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R50-BB | 4¹⁄₂" x 9³⁄₄" (114 mm x 248 mm) | 50 | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| R30-20BB | 4¹⁄₂" x 20" (114 mm x 508 mm) | 30 | <1 psi @ 20 gpm (<0.1 bar @ 76 Lpm) |
Note: Micron ratings are based on manufacturer's internal testing.
Performance data concerning sediment reduction percent efficiency and approximate net pressure drop is fragmented in the extracted text. See the official PDF for exact tabulated values.
Certifications
The R50-BB model is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or more recent revisions. For contractual purposes, data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.