
Tóm tắt tài liệu kỹ thuật
PCF
Engineering summary from PDF text extraction for PCF. Verify every value with the OEM datasheet.
Summary
Product identification
Pentair Pentek PCF Series Filter Cartridges are mixed bed deionization cartridges developed for industries requiring deionized water. These cartridges use high-capacity, semi-conductor-grade resin, post-processed to minimize total organic carbon (TOC) levels. They are available in three sizes and capacities.
Operating limits
- Temperature Rating: 40-100°F (4.4-37.8°C)
Feed water
- WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- CAUTION: Do not use cartridges on equipment that has an electric conductivity water level indicator.
Product water
Designed for deionizing water up to 16 megohms, with low levels of total organic carbon (TOC) and total dissolved solids (TDS) required.
Mechanical / hydraulic
Materials of Construction
- Filter Media: Mixed bed DI resins
- Endcaps: Polypropylene
- Shell: Polypropylene
- Pre-Filter: Polypropylene
- Post-Filter: Polypropylene
- Gaskets: Buna-N®
Cartridge Specifications
| Model # | Part # | Maximum Dimensions | Capacity Grains (mg TDS as CaCO₃) | Initial ΔP @ Flow Rate | Suggested Flow Rate |
|---|---|---|---|---|---|
| PCF1-10MB | 155273-43 | 2.67" x 9.75" (68 mm x 248 mm) | 270 (17,500) | 1.5 psi @ 0.25 gpm (0.10 bar @ 0.95 Lpm) | 0.25 gpm (0.95 Lpm) |
| PCF1-20MB | 155274-43 | 2.67" x 20" (68 mm x 508 mm) | 600 (38,800) | 3.4 psi @ 0.50 gpm (0.23 bar) | 0.50 gpm (1.9 Lpm) |
| BBF1-20MB | 155281-43 | 4.50" x 20" (114 mm x 508 mm) | 1,850 (120,000) | 1.1 psi @ 1.25 gpm (0.08 bar @ 4.7 Lpm) | 1.25 gpm (4.7 Lpm) |
Properties and Characteristics (Resin)
- Function Structure:
- Cation: R-SO₃⁻H⁺
- Anion: AR-N(CH₂)₂(C₂H₂OH)⁺OH⁻
- Physical Form: Moist spherical bead
- Ionic Form: H/OH
- Percent Conversion:
- Hydrogen: 99% minimum
- Hydroxide: 95% minimum
Typical Applications
- Circuit board printing
- Pharmaceutical use
- Steam and humidification
- Cosmetics
- Steam processors
- Humidification systems
- Recirculating/cooling towers
- Power generating equipment
- Medical/laboratory use
- Lasers
- Jet water sprayers
- Boiler make-up water
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.