Quay lại Pentair Filtration
Pentair logo

Tóm tắt tài liệu kỹ thuật

Coconut Based

Engineering summary from PDF text extraction for Coconut Based. Verify every value with the OEM datasheet.

Summary

Product identification

Pentair® Pentek® Coconut-Based Carbon Block Cartridges are designed for reducing unwanted taste and odor, and chlorine taste & odor from potable drinking water, as well as fine sediment. These cartridges are made from a water-washed, coconut-carbon formulation, featuring an outer wrap to increase useful life by trapping sediment.

They are suitable for residential, food service, commercial, and industrial applications, and can serve as polishing filters or pre-filters.

Features/Benefits:

  • Water-washed coconut-carbon formulation
  • Enhanced dirt-holding capacity
  • Premium high capacity bad taste and odor, and chlorine taste & odor reduction

Materials:

  • Filter Media:
    • CCBC: Water-Washed Coconut Based Carbon
    • CEP: Acid-Washed Coconut Based Carbon
  • Endcaps: Polypropylene
  • Outer Wrap: Polyolefin
  • Netting: Polyethylene
  • Gaskets: Buna-N

Operating limits

  • Temperature Rating: 40-125°F (4.4-51.7°C)

Feed water

  • Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • Note: Cartridges may contain a very small amount of carbon fines (very fine black powder). After installation, follow instructions for flushing the cartridge to remove fines before using the water. Flush the tap for at least 20 seconds prior to using water for drinking or cooking, especially if the tap has not been used daily.

Product water

These cartridges are highly effective at reducing unwanted taste and odor, and chlorine taste & odor from potable drinking water. They are also effective at reducing fine sediment.

Mechanical / hydraulic

Specifications and Performance

Part #Model #Maximum DimensionsNominal RatingInitial ΔP @ Flow RateChlorine Taste & Odor Reduction @ Flow RateVOC Reduction @ Flow Rate
155713-43CCBC-102.88" x 9.75" (73 mm x 248 mm)1 micron3.3 psi @ 1 gpm (0.23 bar @ 3.8 Lpm)>20,000 gallons @ 1 gpm (75,700L @ 3.8 Lpm)>800 gallons @ 0.6 gpm (3,028L @ 3.8 Lpm)
155714-43CEP-10E2.88" x 9.75" (73 mm x 248 mm)5 micron3.0 psi @ 1 gpm (0.2 bar @ 3.8 Lpm)>4,000 gallons @ 1 gpm (15,142L @ 3.8 Lpm)NA
155788-43CEP-20E2.88" x 20.00" (73 mm x 508 mm)5 micron3.0 psi @ 2 gpm (0.2 bar @ 7.6 Lpm)>8,000 gallons @ 2 gpm (30,283L @ 7.6 Lpm)NA

Note: All performance data marked with an asterisk () is based on manufacturer's internal testing.*

Certifications

  • Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.

Disclaimer: This summary is generated from an extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.