Quay lại Pentair Filtration
Pentair logo

Tóm tắt tài liệu kỹ thuật

R Series

Engineering summary from PDF text extraction for R Series. Verify every value with the OEM datasheet.

Summary

Product identification

Pentair® Pentek® R Series Cartridges are manufactured from a durable, non-woven, and reusable polyester fabric suitable for a wide range of filtration uses.

Key features:

  • Pleated design maximizes dirt holding capacity
  • Versatile and reusable
  • Durable polyester media is bacteria- and chemical-resistant
  • R30: Nominal 30 micron rating
  • R50: Nominal 50 micron rating
  • Available in lengths: 4.88", 10", 20"

Operating limits

  • Temperature Rating: 40-125°F (4.4-51.7°C)

Mechanical / hydraulic

The media is pleated around a polypropylene core for added strength. Standard pleated endcaps are immersed in a thermo-setting vinyl plastisol. Big Blue® cartridges have a molded endcap with gaskets. The pleated ends are sealed to the endcap with a thermoplastic adhesive. The overlap seam is sonically welded to reduce internal bypass, improving filtration efficiency.

  • Filter Media: Non-woven polyester
  • Standard Endcaps: Vinyl plastisol
  • Big Blue® Endcaps: Polypropylene
  • Core: Polypropylene

The standard 9.75" length cartridge has more than four square feet of polyester fabric, while the larger Big Blue® version has more than 16 square feet.

Model #Part #Maximum DimensionsRating (Nominal)*Initial ∆P @ Flow Rate
R30-478155031-432.63" x 4.88" (67 mm x 124 mm)30 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R30155017-432.63" x 9.75" (67 mm x 248 mm)30 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R50155038-432.63" x 9.75" (67 mm x 248 mm)50 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R30-20155416-432.63" x 20" (67 mm x 508 mm)30 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R30-BB155101-434.50" x 9.75" (114 mm x 248 mm)30 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R50-BB155053-434.50" x 9.75" (114 mm x 248 mm)50 micron<1 psi @ 10 gpm (<0.07 bar @ 38 Lpm)
R30-20BB155430-434.50" x 20" (114 mm x 508 mm)30 micron<1 psi @ 20 gpm (<0.07 bar @ 76 Lpm)

*Based on manufacturer's internal testing.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.


Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions from the complete OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.