
Tóm tắt tài liệu kỹ thuật
DGD Series
Engineering summary from PDF text extraction for DGD Series. Verify every value with the OEM datasheet.
Summary
Product identification
The Pentair® Pentek® DGD Series Cartridges are gradient density filters manufactured from 100% pure polypropylene. They are designed for use in Pentair Pentek Big Blue® Filter Housings.
Key features include:
- Designed for purity; will not impart taste, odor, or color to the filtered liquid.
- Polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
- Advanced design combines selective final filtration with appropriate pre-filtration.
- Achieves up to three times the dirt holding capacity of similar size sediment cartridges.
- Effective filter depth is increased to 233%.
- Spun fibers form a gradient density from outer to inner surfaces.
- Suitable for residential, rural, municipal, and commercial applications.
- Nominal micron ratings available: 1, 5, 25 micron.
- Available lengths: 10", 20".
- Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Operating limits
- Temperature Rating: 40-145°F (4.4-62.8°C)
Feed water
WARNING: Do not use with microbiologically unsafe or of unknown quality water without adequate disinfection before or after the system.
Mechanical / hydraulic
The following specifications are based on manufacturer's internal testing.
| Model # | Part # | Maximum Dimensions | Rating (Nominal) | Initial ∆P @ Flow Rate |
|---|---|---|---|---|
| DGD-2501 | 155359-43 | 4.50" x 9.88" (114 mm x 251 mm) | 1 micron | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| DGD-5005 | 155357-43 | 4.50" x 9.88" (114 mm x 251 mm) | 5 micron | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| DGD-7525 | 155355-43 | 4.50" x 9.88" (114 mm x 251 mm) | 25 micron | <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm) |
| DGD-2501-20 | 155360-43 | 4.50" x 20" (114 mm x 508 mm) | 1 micron | <1 psi @ 20 gpm (<0.1 bar @ 76 Lpm) |
| DGD-5005-20 | 155358-43 | 4.50" x 20" (114 mm x 508 mm) | 5 micron | <1 psi @ 20 gpm (<0.1 bar @ 76 Lpm) |
| DGD-7525-20 | 155356-43 | 4.50" x 20" (114 mm x 508 mm) | 25 micron | <1 psi @ 20 gpm (<0.1 bar @ 76 Lpm) |
Disclaimer: This summary is based solely on the provided text extract. The original PDF may contain additional figures, footnotes, or more recent revisions. For contractual purposes, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.