Quay lại Pall filters
Pall logo

Tóm tắt tài liệu kỹ thuật

Chem-Fine Melt Blown Halar Filter Cartridges

Engineering summary from PDF text extraction for Chem-Fine Melt Blown Halar Filter Cartridges. Verify every value with the OEM datasheet.

Summary

Product identification

The Chem-Fine™ Melt Blown Halar Series Filter Cartridges offer increased chemical and thermal resistance, great durability, and mechanical strength. They utilize extremely pure filtration media and are free of resins, binders, and adhesives. The media is highly resistant to ozone.

Key features:

  • Halar media offers increased chemical and thermal resistance
  • Great durability and mechanical strength
  • Extremely pure filtration media
  • High effective surface area per 10" (25.4 cm) cartridge
  • Very low initial pressure drop
  • Free of resins, binders, and adhesives
  • Media very resistant to ozone

Performance Specifications

  • Filter Grades: 5, 10 µm
  • Liquid Retention Ratings:
    • CFT 5: 90% Efficiency at 5 µm, >99.9% Efficiency at 10 µm
    • CFT 10: 90% Efficiency at 10 µm, >99.9% Efficiency at 15 µm
    • Note: Liquid removal ratings are based on Pall’s Dynamic Efficiency test protocol.

Operating limits

  • Maximum Forward Differential Pressure:
    • 70 psid (4.8 bard) @ 120°F (49°C)
    • 50 psid (3.4 bard) @ 180°F (82°C)
  • Recommended Change-out Differential Pressure: 35 psid (2.4 bard)

Mechanical / Hydraulic

Materials of Construction:

  • Filter Media: High Purity Melt Blown ECTFE
  • Hardware: Polypropylene, Polyester (DOE, M3, or M8 only)
  • Support Material: Polyester upstream/Halar downstream (standard), or Halar upstream & downstream
  • Gaskets/O-rings: Silicone Elastomer, Nitrile, Nordel, Fluorocarbon Elastomer, White Silicone, FEP, White Nitrile

Dimensions (nominal):

  • Outside Diameter: 2 3⁄5" (6.4 cm)
  • Lengths: 4" (10.2 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (102 cm)

Flow vs. Differential Pressure: The data sheet includes a graph illustrating typical flow rates versus differential pressure for application sizing (for 5 µm and 10 µm cartridges, per 10" (25.4 cm) cartridge, using water at 68°F (20°C)). See the official PDF for exact tabulated values.

Toxicity and Rinse-Up

  • Toxicity: All polypropylene components meet specifications for biological safety as per USP Class VI-121°C plastics (gaskets/O-rings excluded).
  • Rinse-Up: Rinse-up to 18 Megohm-cm with minimum throughput.

Applications

  • Electroless nickel plating solutions
  • High purity chemical filtration
  • Ultrapure water systems using ozone
  • Hot ultrapure water systems

Ordering Information

Products are ordered using a code sequence that specifies:

  • Filter Grades (e.g., 5 µm, 10 µm)
  • Cartridge Lengths (e.g., 4", 10", 20", 30", 40")
  • End Configurations (e.g., DOE with gasket seals & end caps, SOE flat closed end with various O-ring styles)
  • Support Material (Polyester upstream/Halar downstream, or Halar upstream & downstream)
  • Hardware (Polyester, Polypropylene)
  • Gasket/O-ring Materials (e.g., Silicone, Nitrile, Fluorocarbon Elastomer, FEP Encapsulated Silicone) See the official PDF for detailed part number codes and options.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions of the product datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.