Quay lại Global Filter
Global Filter logo

Tóm tắt tài liệu kỹ thuật

PPE

Engineering summary from PDF text extraction for PPE. Verify every value with the OEM datasheet.

Summary

Product identification

PEE-Series Economy Grade Pleated Polyester Depth Media Filter Cartridges are an efficient and economical filtration option. They feature all-polyester construction for higher temperature use and a 2.5” OD suitable for various housings. Manufactured in a clean-room environment, they are offered in both absolute-rated (up to 99.98% retention) and nominally-rated (90% retention) grades.

Construction Materials

  • Filtration Media: Pleated Polyester Meltblown
  • Support Media: Spun-bonded Polyester
  • End Caps: Polyester
  • Center Core: Polyester
  • Outer Support Netting: Polyester
  • O-Rings/Gaskets: Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®

Dimensions

  • Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
  • Outside Diameter: 2.50 inches (6.35 cm) nominal

Operating limits

  • Change Out ΔP (recommended): 35 PSID
  • Temperature (max): 235˚F (113˚C)
  • Differential Pressure (max): 60 PSID (4.1 bar) at 68˚F (20˚C)

Typical Applications

  • Process Water
  • Solvents
  • Fine Chemicals
  • Plating Chemicals
  • Wastewater
  • Produced Water
  • Hydrocarbons
  • Synthetic Lubricants

Ordering Information

The ordering code follows the format PEE - [Rating (µ)] [Retention] [Length] [End Cap Style] [O-Rings/Gaskets] - [Adders].

  • Rating (µ): Available from 0.5 to 20.0 µm.
  • Retention: A = Absolute, N = Nominal.
  • Length: 10” (25.4 cm) to 40” (101.6 cm).
  • End Cap Style: Options include DOE Flat Gasket, 222 w/ Fin, 222 w/ Flat Cap, 222 w/ Spring.
  • O-Rings/Gaskets: Options include Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®.
  • Adders: Options include 316SS Compression Spring (CS) and Stainless Steel Core (SS).

See the official PDF for exact tabulated values and complete ordering options.


Disclaimer: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required. This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.