
Tóm tắt tài liệu kỹ thuật
GPFA
Engineering summary from PDF text extraction for GPFA. Verify every value with the OEM datasheet.
Summary
Product identification
The GPFA-Series High Purity All-Fluoropolymer Filter Cartridges are designed for superior chemical compatibility, temperature range, and ultra-low extractables, meeting the demanding needs of the micro-electronics industry. They are ideal for aggressive “wet-etch and clean” applications. The PTFE membrane provides high flow rates at low pressure drop, while the PFA-440HP hardware ensures superior chemical resistance and high temperature tolerance. Minimized ionic and TOC extractables are achieved through a specialized UPW flush process. A wet-packing option is available for ease of wetting in aqueous applications.
Construction Materials
- Filtration Media: PTFE
- Support Media: PFA
- End Caps: PFA440HP
- Center Core: PFA440HP
- Outer Support Cage: PFA440HP
- O-Rings: Teflon® Encapsulated Viton®
Operating limits
- Change Out ΔP (recommended): 35 PSID
- Temperature (max): 365˚F (185˚C)
- Differential Pressure (max): 60 PSID (4.1 bar) at 68˚F (20˚C)
Cleanliness
The Semiconductor Rinse (SR) option provides extraordinary product cleanliness with typical levels:
- Metals Extractable: < 20 ppb total
- Particulate Extractable:
- ≤ 2 counts/ml at ≥ 0.2µ
- ≤ 1 count/ml at ≥ 1.0µ
- TOC Extractable: below detection limits
Mechanical / hydraulic
- Length: 5 to 40 inches (12.7 to 101.6 cm) nominal
- Outside Diameter: 2.68 inches (6.8 cm) nominal
Flow Rate vs Pressure Drop: Performance data for flow rate versus pressure drop is available for GPFA-Series Pleated All-Fluoropolymer PTFE/PFA cartridges. See the official PDF for exact tabulated values.
Typical Applications
- Highly Reactive Chemicals:
- Acetic Acid (10%)
- Hydrofluoric Acid (50%)
- Hydrogen Peroxide (30%)
- Nitric Acid (conc.)
- Phosphoric Acid (conc.)
- Sulfuric Acid (conc.)
- Ammonium Hydroxide (conc.)
- Potassium Hydroxide (conc.)
- Sodium Hydroxide (conc.)
- TMAH (5%)
- Aqua Regia (HNO₃:HCl)
- BOE; NH₄F:HF
- Mixed Acid Etch
- ChromPhos Etch
- Piranha Etch
Ordering Information
- Rating (µ): 0.05, 0.1, 0.2, 0.45, 1.0, 5.0, 10.0
- Length: 5” (12.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), 40” (101.6 cm)
- End Cap Style:
- 3 = 222 w/Fin
- 4 = 222 w/Flat Cap
- 6 = 226 w/Flat Cap
- 7 = 226 w/Fin
- 24 = 222 w/Hat Cap
- O-Rings:
- T = Teflon® Encapsulated Viton®
- Options:
- SR = Semiconductor Rinse
- W = Wet Packed
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data for any project must match the OEM PDF revision used on that project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.