
Tóm tắt tài liệu kỹ thuật
EHF3
Engineering summary from PDF text extraction for EHF3. Verify every value with the OEM datasheet.
Summary
Product identification
- EHF3-Series High Flow Pleated Filter Cartridges are designed for critical filtration in high flow applications.
- Features large diameter and high surface area to reduce maintenance and production downtime.
- Direct replacement for the 3M/Cuno™ High Flow series cartridges.
- Available with polypropylene or microglass media.
- Utilizes polypropylene hardware.
- Provides broad chemical compatibility.
- Filtration efficiencies exceed 99%.
Mechanical / hydraulic
- Dimensions:
- Length: 40, 60 inches
- Outside Diameter: 6.5 inches
- Inside Diameter: 3.0 inches
- Construction Materials:
- Filtration Media: Polypropylene or Microglass
- Support Media: Polypropylene
- End Caps: Glass-reinforced Nylon
- Center Core: Polypropylene
- Outer Support Cage: Polypropylene
- O-Rings/Gaskets: Buna, EPDM, Silicone, Viton®
Operating limits
- Recommended Change Out Differential Pressure (ΔP): 35 PSID
- Maximum Temperature (Polypropylene media): 160˚F (71˚C)
- Maximum Temperature (Microglass media): 200˚F (93˚C)
- Maximum Differential Pressure: 60 PSID (4.1 bar) at 68˚F (20˚C)
Sanitization/Sterilization
- Filtered Hot Water: 80˚C for 30 min.
Food Safety Compliance
- Materials of construction comply with FDA regulations for food and beverage contact use as detailed in 21CFR.
- Materials used to produce filter media and hardware are deemed safe for use in contact with foodstuffs in accordance with EU Directives 2002/72/EC, 1935/2004, and/or 10/2011.
Ordering Information
The EHF3 series is available with the following options:
- Material: Polypropylene (PP) or Microglass (FG)
- Micron Rating (µm): 1.0, 2.0, 5.0, 10.0, 15.0, 25.0, 40.0, 70.0
- Retention: Absolute (A) or Nominal (N)
- Length: 40” (101.6 cm) or 60” (152.4 cm)
- O-Rings: Buna (B), EPDM (E), Silicone (S), Viton® (V)
Disclaimer: This summary is based on the provided text extraction and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.