Datasheet summary
LOFTREX M
Engineering summary from PDF text extraction for LOFTREX M. Verify every value with the OEM datasheet.
Summary
Product identification
LOFTREX M Filter Cartridges are made of 100% high purity polypropylene (melt blown) micro fibres, thermally bonded on a polypropylene centre core.
Key features:
- Pure melt blown Polypropylene
- No binders nor adhesives
- According to FDA requirements (CFR 177.1520)
- High dirt holding capacity
- Excellent chemical compatibility
- Individually sealed in plastic wrapping
- Label heat stamped on cartridge
Application Examples:
- Pharmaceutical: Pre-filtration, ultrapure water systems (Pre-RO)
- Electronics: Pre-RO, bulk chemical pre-filtration
- Cosmetics: Mouthwash, lotions
- Metal Finishing: Machine coolants, plating solutions, stripping solutions
- Chemical Processing: Bulk chemical filtration, sodium hypochlorite, acid filtration, make-up water
- Food & Beverage: Bottled water, wine pre-filtration, beer filtration, edible oils, milk, fruit juice
- Photographic: Film processing, developer, fixer
- Oil & Gas: Completion fluids, deep well injection, amine filtration
Product Specifications:
- Filter Medium: Polypropylene (melt blown)
- Inner Core: Polypropylene
- End caps: Polypropylene
- Gasket (DOE): Polypropylene foamed flat gasket
- O-Rings (Code 1 to 4): Silicone (standard); Viton & EPDM (optional)
Operating limits
- Maximum Differential Pressure: 4.0 bar @ 25°C
- Maximum Working Temperature: 80°C
- Sanitization / steam sterilization: 30 min @ 121°C (Code 3 only)
Mechanical / hydraulic
- Retention Ratings: 1, 3, 5, 10, 20, 30, 40, 50, 75, 90 & 120µm @ 95% efficiency
- Outside Diameter: 64 mm
- Inside Diameter: 27 mm
- Lengths: 5”, 9³/₄”, 10”, 19¹/₂”, 20”, 29¹/₄”, 30”, 39”, 40”
Liquid Flow Specifications: Flow rate is per 10” cartridge at ambient temperature. For liquids other than water, multiply the pressure drop by the fluid viscosity in centi Poise.
Pressure drop vs. flow rate data is provided graphically. See the official PDF for exact tabulated values.
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.