
Tóm tắt tài liệu kỹ thuật
Duplex Plus 3P BX
Engineering summary from PDF text extraction for Duplex Plus 3P BX. Verify every value with the OEM datasheet.
Summary
Product identification
- Product line: Duplex Plus 3P BX housings
- Designed for quick-fit cartridges with double O-ring.
- The exclusive DUPLEX housings allow faster and safer installations of serial filtration units.
Applications
- Filtration and treatment of water with neutral pH and drinking water.
- Domestic use: Filtration and treatment of drinking water, protection of taps, boilers, washing machines, and other installations.
- Technical use: Pre-filtration, micro-filtration; protection of pumps, heating systems, softeners, demineralising and chlorine-removing appliances, reverse osmosis units.
Operating limits
- Max working pressure: 8 BAR
- Max working temperature: 45°C
Feed water
- Suitable for water with neutral pH.
- Suitable for drinking water.
Mechanical / hydraulic
- Materials (non-toxic, suitable for drinking water):
- Head and ring nut: Reinforced polypropylene
- Transparent bowl: SAN
- O-ring: ETP
- Breather-valve: Body polypropylene, O-ring ETP
- IN/OUT threads: CW 614 N brass inserts
- IN/OUT Threads: Available with 3/4” and 1” brass inserts.
- Variants (available on minimum quantity):
- FP: Female plastic IN/OUT threads, BSP type 3/4”.
- AB: Housings with opaque bowl, impermeable to the light.
- Accessories:
- Wall bracket (-D-)
- Spanner (-U-)
- Screws
Models
The following models are available with transparent bowls and IN/OUT female threads with FO brass inserts:
- Medium:
- 5” cartridge height; 3/4” IN/OUT threads.
- 5” cartridge height; 1” IN/OUT threads.
- Junior:
- 7” cartridge height; 3/4” IN/OUT threads.
- 7” cartridge height; 1” IN/OUT threads.
- Senior:
- 10” cartridge height; 3/4” IN/OUT threads.
- 10” cartridge height; 1” IN/OUT threads.
- Master:
- 20” cartridge height; 3/4” IN/OUT threads.
- 20” cartridge height; 1” IN/OUT threads.
See the official PDF for exact tabulated values for dimensions A and B.
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions of the product datasheet. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.