Tóm tắt tài liệu kỹ thuật
MW series
Engineering summary from PDF text extraction for MW series. Verify every value with the OEM datasheet.
Summary
Product identification
The MW Series consists of Industrial oil/water separation UF elements, featuring M-series polyacrylonitrile (PAN) membranes. These membranes are characterized by:
- Pore size: 0.01 microns
- Approximate molecular weight cut-off (MWCO): 20K-50K Dalton
- Surface characteristic: Extremely hydrophilic (water attracting) to avoid fouling by "free" oils, as compared to conventional oleophilic membranes.
MW Elements are designed for oil/water separation and pretreatment of process water before reverse osmosis or nanofiltration.
Product specifications
| Model | Spacer mil (mm) | Active area ft² (m²) | Outer wrap | Part number |
|---|---|---|---|---|
| MW2540F30 | 30 (0.76) | 28 (2.6) | Fiberglass | 1233383 |
| MW4040F50 | 50 (1.27) | 62 (5.8) | Fiberglass | 3050562 |
| MW8040C50 | 50 (1.27) | 264 (24.7) | Cage | 1220654 |
| MW8040F50 | 50 (1.27) | 269 (25.0) | Fiberglass | 1229852 |
Mechanical / hydraulic
Dimensions and Weight
| Model | Type | Dimensions, inches (cm) A | Dimensions, inches (cm) B | Dimensions, inches (cm) C | Weight lbs (kg) |
|---|---|---|---|---|---|
| MW2540F30 | Male | 40.0 (101.6) | 0.75 (1.9) | 2.4 (6.1) | 4 (1.8) |
| MW4040F50 | Male | 40.0 (101.6) | 0.75 (1.9) | 3.9 (9.9) | 11 (5.0) |
| MW8040C50 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (15.9) |
| MW8040C50 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (15.9) |
Operating limits
- Typical Operating Flux: 5 - 20 GFD (8 – 34 LMH)
- Maximum Operating Pressure: 100 psi (700 kPa)
- Maximum Temperature:
- For fiberglass elements:
- Continuous operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°F (50°C)
- For cage elements:
- Continuous operation: 176°F (80°C)
- Clean-In-Place (CIP): 122°F (50°C)
- For fiberglass elements:
- pH Range:
- Continuous operation: 3-9
- Clean-In-Place (CIP): 2-11
- Maximum Pressure Drop:
- Over an element: 15 psi (103 kPa)
- Per housing: 60 psi (414 kPa)
- Chlorine Tolerance: 200,000 ppm-hours
Note: Oil/water separation applications require the selection of materials compatible with the content of the highly concentrated solution.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.