Tóm tắt tài liệu kỹ thuật
GH series
Engineering summary from PDF text extraction for GH series. Verify every value with the OEM datasheet.
Summary
Product identification
The GH Series consists of industrial ultrafiltration elements featuring a proprietary G-Series Thin-Film Membrane (TFM) with a molecular weight cutoff (MWCO) of 2,500 on polyethylene glycol. These elements are characterized by a smooth, fouling-resistant membrane surface.
GH Elements are utilized for surface water pretreatment, color/TOC reduction, and chemical purification.
| Model | Average permeate flow gpd (m³/day) (1) | MWCO (Dalton) |
|---|---|---|
| GH2540C50 | 370 (1.4) | 2,500 |
| GH2540F30 | 530 (2.0) | 2,500 |
| GH4040F30 | 1,900 (7.2) | 2,500 |
| GH4040F50 | 1,300 (5.0) | 2,500 |
| GH8040C30 | 7,000 (26.5) | 2,500 |
| GH8040C50 | 5,100 (19.3) | 2,500 |
| GH8040F30 | 7,400 (28.0) | 2,500 |
| GH8040F50 | 5,500 (20.8) | 2,500 |
(1) Flux specifications are based on fouling-free water at 160 psi (1,103 kPa) operating pressure and 10% recovery. Individual element flux may vary ± 25%.
Mechanical / hydraulic
| Model | Spacer mil (mm) | Active area ft² (m²) | Outer wrap | Part number | Type | Dimensions A inches (cm) | Dimensions B inches (cm) | Dimensions C inches (cm) | Boxed Weight lbs (kg) |
|---|---|---|---|---|---|---|---|---|---|
| GH2540C50 | 50 (1.27) | 18 (1.7) | Cage | 1207101 | Male | 40.0 (101.6) | 0.75 | 1.90 | 4 (1.8) |
| GH2540F30 | 30 (0.76) | 28 (2.6) | Fiberglass | 1207102 | Male | 40.0 (101.6) | 0.75 | 1.90 | 4 (1.8) |
| GH4040F30 | 30 (0.76) | 85 (7.9) | Fiberglass | 3050061 | Male | 40.0 (101.6) | 0.75 (1.90) | 3.9 (9.9) | 9 (4.1) |
| GH4040F50 | 50 (1.27) | 66 (6.1) | Fiberglass | 3050060 | Male | 40.0 (101.6) | 0.75 (1.90) | 3.9 (9.9) | 9 (4.1) |
| GH8040C30 | 30 (0.76) | 374 (34.7) | Cage | 1207118 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 29 (13.2) |
| GH8040C50 | 50 (1.27) | 300 (27.9) | Cage | 1207119 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 29 (13.2) |
| GH8040F30 | 30 (0.76) | 364 (33.8) | Fiberglass | 1207120 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 29 (13.2) |
| GH8040F50 | 50 (1.27) | 284 (26.4) | Fiberglass | 1207121 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 29 (13.2) |
Operating limits
- Typical Operating Flux: 5-20 GFD (8-34 LMH)
- Maximum Operating Pressure: 400 psi (2,760 kPa)
- Maximum Temperature:
- Continuous Operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°F (50°C)
- pH Range:
- Continuous Operation: 2.0-10.0
- Clean-In-Place (CIP): 1.0-13.0 (1)
- Maximum Pressure Drop:
- Over an element: 15 psi (103 kPa)
- Per housing: 60 psi (414 kPa)
- Chlorine Tolerance: 20-50 ppm days
(1) Refer to Cleaning Guidelines Technical Bulletin TB1194.
Disclaimer: This summary is generated from extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.