Quay lại Veolia Membranes
Veolia logo

Tóm tắt tài liệu kỹ thuật

AG FR series

Engineering summary from PDF text extraction for AG FR series. Verify every value with the OEM datasheet.

Summary

Product identification

The AG FR Series consists of thin-film reverse osmosis (RO) elements designed for challenging water and wastewater applications. These elements feature high flux and high sodium chloride (NaCl) rejection, with an element construction that enhances feed flow to minimize fouling and optimize energy performance. They also facilitate more effective cleaning cycles, reducing cleaning frequency and the need for harsh chemicals.

The membrane type is A-Series, thin-film membrane (TFM).

ModelAverage Permeate Flow gpd (m³/day)Average NaCl RejectionMinimum NaCl RejectionMembrane Area ft² (m²)Outer WrapFeed Spacer (mil)Part Number
AG4040FM FR,342,200 (8.8)99.5%99.0%80 (7.4)Fiberglass343154063
AG8040F-400 FR,3411,000 (41.6)99.5%99.1%400 (37.2)Fiberglass343136931

Testing Conditions for Rejection (1)(2):

  • 2,000 ppm NaCl solution
  • 225 psi (1,551 kPa) operating pressure
  • 77°F (25°C)
  • pH 7.5
  • 15% recovery
  • Average salt rejection after 24 hours of operation. Individual flow rate may vary ±20%.

Operating limits

  • Typical Operating Pressure: 200 psi (1,379 kPa)
  • Maximum Operating Pressure: 600 psi (4,137 kPa)
  • Typical Operating Flux: 10-20 GFD (15-35 LMH)
  • Maximum Temperature:
    • Continuous operation: 122°F (50°C)
    • Clean-In-Place (CIP): 122°F (50°C)
  • pH Range:
    • Optimum rejection: 7.0-7.5
    • Continuous operation: 2.0-11.0
    • Clean-In-Place (CIP): 1.0-13.0
  • Maximum Pressure Drop:
    • Over an element: 15 psi (103 kPa)
    • Per housing: 50 psi (345 kPa)
  • Chlorine Tolerance: 1,000+ ppm x hours (Dechlorination recommended)

Feed water

  • NTU < 1
  • SDI₁₅ < 5

Mechanical / hydraulic

  • Outer Wrap: Fiberglass
  • Feed Spacer: 34 mil
ModelTypeDimensions, inches (cm)Boxed Weight lbs (kg)
AG4040FM FR,34MaleA=40.0 (101.6), B=0.75 (1.90), C=3.9 (9.9)11 (5)
AG8040F-400 FR,34FemaleA=40.0 (101.6), B=1.125 (2.86), C=7.9 (20.1)35 (16)

Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or revisions not included here. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.