Tóm tắt tài liệu kỹ thuật
8040-X201-TSA
Engineering summary from PDF text extraction for 8040-X201-TSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Series: 8" X-20 Low Fouling RO Element Series
- Model: 8040-X201-TSA
- Membrane Type: X20 Fully Aromatic Polyamide-Urea Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap with FoulGuard Technology
Operating limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 2 NTU
Product water
Performance for Model 8040-X201-TSA is based on test conditions (2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation):
- Permeate flow: 9,700 GPD (36.0 m³/day)*
- Average Salt Rejection: 98.50%
- Minimum Salt Rejection: 99.50% * Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Mechanical / hydraulic
- Element Weight: 45 lbs (20 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
- Active Membrane Area: 365 ft² (33.5 m²)
- Feed Spacer: 0.031" thick diamond spacer
- Mechanical Configuration: TriSep Style Core Tube
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the latest revisions. Contractual data for any project must match the OEM PDF revision used on that project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.