Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

8040-UE10-QSA

Engineering summary from PDF text extraction for 8040-UE10-QSA. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Name: 8040 UE10 Ultrafiltration Element
  • Model: 8040-UE10-QSA
  • Membrane Type: AUM Advanced Ultrafiltration Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap

Performance

  • Nominal Permeate Flow: 14,000 GPD (53 m³/day)
    • Performance is based on the following test conditions: 500 ppm 10K PEG, 30 psi, 77°F (25°C), 15% recovery, pH 8.0, 30 minutes operation. Individual element permeate flow may vary +/- 20%.
  • M.W.C.O.: 10,000

Operating limits

  • Active Membrane Area: 355 ft² (33.0 m²)
  • Typical Applied Pressure: 50 - 150 psi (3.4 - 10 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Maximum Operating Temperature: 113°F (45°C)
  • Feed pH Range: 2 - 11 continuous
  • Chlorine Tolerance: 10 ppm
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Maximum Pressure Drop: 15 psi (1.0 bar) per element; 50 psi (3.4 bar) across housing
  • Maximum Feed SDI (15 minutes): 5.0
  • Maximum Feed Turbidity: 1 NTU

Mechanical / hydraulic

  • Element Weight: 45 lbs. (20 kg)
  • Length (A): 40.0” (1,016 mm)
  • Diameter (B): 7.9” (200 mm)
  • Permeate Tube (C): 1.50” (38.1 mm)
  • Permeate Tube Style: TriSep Style tube
  • Feed Spacer: 0.031" thick diamond spacer

Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions of the OEM datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.