Tóm tắt tài liệu kỹ thuật
8040-TS83-UWAN
Engineering summary from PDF text extraction for 8040-TS83-UWAN. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: 8040-TS83-UWAN
- Series: 8" TS80 Nanofiltration Element Series
- Membrane Type: ANM Aromatic Polyamide Advanced Nanofiltration Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
Mechanical / hydraulic
- Core Tube Style: TriSep
- Element Weight: 50 lbs (23 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
- Feed Spacer: 0.028" thick diamond spacer
Operating limits
- Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
Feed water
- Maximum SDI (15 minutes): 4.0
- Maximum Turbidity: 1 NTU
Product water
- Performance is based on the following test conditions: 2,000.0 ppm MgSO₄, 110.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Performance (Model 8040-TS83-UWAN):
- Permeate flow: 11,000 GPD (41.0 m³/day)
- Average Salt Rejection (%): 97.00
- Minimum Salt Rejection (%): 98.50
Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Disclaimer: This summary is generated from an extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.