Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

8040-TS80-UWAN

Engineering summary from PDF text extraction for 8040-TS80-UWAN. Verify every value with the OEM datasheet.

Summary

Product identification

  • Series: 8" TS80 Nanofiltration Element Series
  • Model: 8040-TS80-UWAN
  • Membrane Type: ANM Aromatic Polyamide Advanced Nanofiltration Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap

Operating limits

  • Recommended Applied Pressure: 40 - 200 psi (3 - 14 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

  • Feedwater pH Range: 2 - 11 continuous
  • Chlorine Tolerance: <0.1 ppm
  • Maximum SDI (15 minutes): 4.0
  • Maximum Turbidity: 1 NTU

Product water

Performance is based on test conditions: 2,000.0 ppm MgSO₄, 110.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.

  • Permeate Flow: 10,000 GPD (37.0 m³/day)
    • Note: Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
  • Average Salt Rejection: 97.00%
  • Minimum Salt Rejection: 99.00%

Mechanical / hydraulic

  • Element Weight: 50 lbs (23 kg)
  • Length (A): 40.0 inches (1,016 mm)
  • Diameter (B): 7.9 inches (200 mm)
  • Permeate Tube (C): 1.50 inches (38.1 mm)
  • Active Membrane Area: 400 ft² (37.2 m²)
  • Core Tube: TriSep Style
  • Feed Spacer: 0.028" thick diamond spacer

Disclaimer: This summary is based solely on the extracted text. It may not include all figures, footnotes, or the latest revisions present in the official PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.