Tóm tắt tài liệu kỹ thuật
8040-ACM5-UWA
Engineering summary from PDF text extraction for 8040-ACM5-UWA. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Series: 8" ACM-LP Low Pressure RO Element Series
- Model: 8040-ACM5-UWA
- Core Tube: TriSep Style Core Tube
- Membrane Type: ACM-LP Fully Aromatic Polyamide Low Pressure Advanced Composite
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 400 ft² (37.2 m²)
- Feed Spacer: 0.028" thick diamond spacer
Operating limits
- Recommended Applied Pressure: 50 - 300 psi (3 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
Feed water
- Feedwater pH Range: 2 - 11 continuous
- Maximum SDI (15 minutes): 4.0
- Maximum Turbidity: 1 NTU
Product water
Performance is based on the following test conditions: 2,000.0 ppm NaCl, 150.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Permeate Flow: 12,500 GPD (47.0 m³/day)*
- Average Salt Rejection: 97.50%
- Minimum Salt Rejection: 98.50%
* Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Mechanical / hydraulic
- Element Weight: 50 lbs (23 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.