Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

8040-ACM3-UWAN

Engineering summary from PDF text extraction for 8040-ACM3-UWAN. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Series: 8" ACM RO Element Series
  • Model: 8040-ACM3-UWAN
  • Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap
  • Core Tube Style: TriSep Style Core Tube
  • Active Membrane Area: 400 ft² (37.2 m²)
  • Feed Spacer: 0.028" thick diamond spacer

Operating limits

  • Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
  • Feedwater pH Range: 2 - 11 continuous
  • Chlorine Tolerance: <0.1 ppm
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

  • Maximum SDI (15 minutes): 4.0
  • Maximum Turbidity: 1 NTU

Product water

Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.

  • Permeate flow (for 8040-ACM3-UWAN): 12,000 GPD (45.0 m³/day)
  • Average Salt Rejection: 98.50%
  • Minimum Salt Rejection: 99.20%

Mechanical / hydraulic

Units are in pounds and inches, with kilograms and millimeters in parentheses.

  • Element Weight: 50 (23)
  • Length (A): 40.0 (1,016)
  • Diameter (B): 7.9 (200)
  • Permeate Tube (C): 1.50 (38.1)

Disclaimer: This summary is based on the extracted text and may not include all figures, footnotes, or the latest revisions found in the official PDF datasheet. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.