Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

8040-ACM3-TSAN

Engineering summary from PDF text extraction for 8040-ACM3-TSAN. Verify every value with the OEM datasheet.

Summary

Product identification

  • Model: 8040-ACM3-TSAN
  • Series: 8" ACM RO Element Series
  • Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap
  • Active Membrane Area: 365 ft² (33.5 m²)

Operating limits

  • Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
  • Feedwater pH Range: 2 - 11 continuous
  • Chlorine Tolerance: <0.1 ppm
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1
  • Maximum SDI (15 minutes): 5.0
  • Maximum Turbidity: 1 NTU

Product water

  • Permeate Flow: 11,000 GPD (41.0 m³/day)
    • Note: Permeate flow is clean water flux at standard conditions. Not applicable for all feedwater conditions. Individual element's permeate flow may vary ± 15%.
  • Average Salt Rejection: 98.50%
  • Minimum Salt Rejection: 99.20%

Mechanical / hydraulic

  • Element Weight: 45 lbs (20 kg)
  • Length: 40.0 inches (1,016 mm)
  • Diameter: 7.9 inches (200 mm)
  • Permeate Tube: 1.50 inches (38.1 mm)
  • Core Tube: TriSep Style
  • Feed Spacer: 0.031" thick diamond spacer

Performance Test Conditions

Performance is based on the following test conditions:

  • NaCl Concentration: 2,000.0 ppm
  • Applied Pressure: 225.0 psi
  • Temperature: 25°C
  • Recovery: 15%
  • pH: 8.0
  • Operation Duration: 30 minutes

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.