Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

8040-ACM3-TSA

Engineering summary from PDF text extraction for 8040-ACM3-TSA. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Series: 8" ACM RO Element Series
  • Model: 8040-ACM3-TSA
  • Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap
  • Active Membrane Area: 365 ft² (33.5 m²)

Operating limits

  • Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1

Feed water

  • pH Range: 2 - 11 continuous
  • Chlorine Tolerance: <0.1 ppm
  • Maximum SDI (15 minutes): 5.0
  • Maximum Turbidity: 1 NTU

Product water

  • Permeate Flow: 11,000 GPD (41.0 m³/day)
  • Average Salt Rejection: 98.50%
  • Minimum Salt Rejection: 99.20%
  • Performance is based on the following test conditions:
    • 2,000.0 ppm NaCl
    • 225.0 psi
    • 25°C
    • 15% recovery
    • pH 8.0
    • 30 minutes operation

Mechanical / hydraulic

  • Element Weight: 45 lbs (20 kg)
  • Length (A): 40.0 inches (1,016 mm)
  • Diameter (B): 7.9 inches (200 mm)
  • Permeate Tube (C): 1.50 inches (38.1 mm)
  • Core Tube Style: TriSep
  • Feed Spacer: 0.031" thick diamond spacer

Disclaimer: This summary is generated from an extracted text segment and may not include all figures, footnotes, or the most recent revisions present in the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.