Tóm tắt tài liệu kỹ thuật
8040-ACM2-UWAN
Engineering summary from PDF text extraction for 8040-ACM2-UWAN. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: 8040-ACM2-UWAN
- Series: 8" ACM RO Element Series
- Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 400 ft² (37.2 m²)
Operating limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum SDI (15 minutes): 4.0
- Maximum Turbidity: 1 NTU
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
Feed water
Performance is based on the following test conditions:
- 2,000.0 ppm NaCl
- pH 8.0
Product water
- Average Salt Rejection: 98.50%
- Minimum Salt Rejection: 99.50%
- Permeate Flow: 10,700 GPD (40.0 m³/day)
Mechanical / hydraulic
- Element Weight: 50 lbs (23 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 7.9 inches (200 mm)
- Permeate Tube (C): 1.50 inches (38.1 mm)
- Core Tube: TriSep Style Core Tube
- Feed Spacer: 0.028" thick diamond spacer
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.