Tóm tắt tài liệu kỹ thuật
8040-ACM1-TSA
Engineering summary from PDF text extraction for 8040-ACM1-TSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Series: 8" ACM RO Element Series
- Model: 8040-ACM1-TSA
- Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Core Tube: TriSep Style Core Tube
- Active Membrane Area: 365 ft² (33.5 m²)
Operating limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 80 GPM (18 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Product water
Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Average Salt Rejection: 99.00%
- Minimum Salt Rejection: 99.50%
- Permeate Flow: 8,000 GPD (30.0 m³/day)*
* Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Mechanical / hydraulic
Units are in pounds and inches, with units in parenthesis in kilograms and millimeters.
- Element Weight: 45 (20)
- Length (A): 40.0 (1,016)
- Diameter (B): 7.9 (200)
- Permeate Tube (C): 1.50 (38.1)
- Feed Spacer: 0.031" thick diamond spacer
Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. Contractual data for any project must match the specific OEM PDF revision used on that project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.