Quay lại TriSep Membranes
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

4040-UE10-QSF

Engineering summary from PDF text extraction for 4040-UE10-QSF. Verify every value with the OEM datasheet.

Summary

Product identification

  • Model: 4040-UE10-QSF
  • Series: 4" AUM Ultrafiltration Element
  • Membrane Type: AUM Advanced Ultrafiltration Membrane
  • Configuration: Spiral Wound, Fiberglass Outer Wrap

Operating limits

  • Recommended Applied Pressure: 20 - 200 psi (1.4 - 14 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
  • Feedwater pH Range: 2 - 11 continuous
  • Chlorine Tolerance: 10.0 ppm
  • Maximum Feed Flow: 20 GPM (4.5 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1
  • Maximum SDI (15 minutes): 5.0
  • Maximum Turbidity: 1 NTU
  • M.W.C.O.: 10,000

Mechanical / hydraulic

  • Core Tube Style: Filmtec Style
  • Feed Spacer: 0.031" thick diamond spacer
  • Active Membrane Area: 85 ft² (7.9 m²)
  • Element Weight: 15 lbs (7 kg)
  • Length (A): 40.00 inches (1,016 mm)
  • Diameter (B): 4.0 inches (101 mm)
  • Permeate Tube (C): 0.75 inches (19.1 mm)

Disclaimer: This summary is generated from an extracted text segment and may not include all figures, footnotes, or the latest revisions present in the full OEM PDF datasheet. Contractual data should always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.