Tóm tắt tài liệu kỹ thuật
4040-ACM2-TSA
Engineering summary from PDF text extraction for 4040-ACM2-TSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: 4040-ACM2-TSA
- Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 88 ft² (8.1 m²)
Operating limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 20 GPM (4.5 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
Feed water
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Product water
Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Average Salt Rejection: 98.50%
- Minimum Salt Rejection: 99.50%
- Permeate Flow: 2,450 GPD (9.0 m³/day)
Mechanical / hydraulic
- Element Weight: 15 pounds (7 kilograms)
- Dimensions:
- Length (A): 40.0 inches (1,016 millimeters)
- Diameter (B): 4.0 inches (101 millimeters)
- Permeate Tube (C): 0.75 inches (19.1 millimeters)
- Feed Spacer: 0.031" thick diamond spacer
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.