Tóm tắt tài liệu kỹ thuật
4040-ACM1-TSA
Engineering summary from PDF text extraction for 4040-ACM1-TSA. Verify every value with the OEM datasheet.
Summary
Product identification
- Series: 4" ACM RO Element Series
- Model: 4040-ACM1-TSA
- Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 88 ft² (8.1 m²)
- Feed Spacer: 0.031" thick diamond spacer
Operating limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 20 GPM (4.5 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
Feed water
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
- Performance Test Conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
Product water
- Permeate Flow (4040-ACM1-TSA): 1,950 GPD (7.0 m³/day)*
- Average Salt Rejection: 98.50%
- Minimum Salt Rejection: 99.50%
* Permeate flow is clean water flux at standard conditions. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Mechanical / hydraulic
- Element Weight: 15 pounds (7 kilograms)
- Length (A): 40.0 inches (1,016 millimeters)
- Diameter (B): 4.0 inches (101 millimeters)
- Permeate Tube (C): 0.75 inches (19.1 millimeters)
- Core Tube: TriSep Style
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions found in the official OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.