Tóm tắt tài liệu kỹ thuật
2540-X201-TSF
Engineering summary from PDF text extraction for 2540-X201-TSF. Verify every value with the OEM datasheet.
Summary
Product Identification
- Product Name: 2.5" X-20 Low Fouling Turboclean Element
- Model: 2540-X201-TSF
- Membrane Type: X20 Fully Aromatic Polyamide-Urea Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
Operating Limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 6 GPM (1.4 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Performance
Performance is based on the following test conditions: 2,000.0 ppm NaCl, 225.0 psi, 25°C, 15% recovery, pH 8.0, 30 minutes operation.
- Average Salt Rejection: 98.00%
- Minimum Salt Rejection: 99.00%
- Permeate Flow: 650 GPD (2.0 m³/day)*
* Permeate flow is clean water flux at standard conditions above. Not applicable for all feedwater conditions. Individual element's permeate flow may vary +/- 15%.
Mechanical / Hydraulic
- Mechanical Configuration: Filmtec Style Core Tube
- Active Membrane Area: 26 ft² (2.4 m²)
- Feed Spacer: 0.031" thick diamond spacer
- Element Weight: 7 lbs (3.2 kg)
- Dimensions (Units: inches, with millimeters in parenthesis):
- Length (A): 40.0 (1,016)
- Diameter (B): 2.5 (63)
- Permeate Tube (C): 0.75 (19.1)
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the full context of the original document. Contractual data for a project must match the OEM PDF revision used on that project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.