Tóm tắt tài liệu kỹ thuật
2540-TS40-TSF
Engineering summary from PDF text extraction for 2540-TS40-TSF. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: 2540-TS40-TSF
- Type: Nanofiltration Element
- Membrane Type: Advanced Polypiperazine Amide Nanofiltration Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Active Membrane Area: 26 ft² (2.4 m²)
Product water
- Average Salt Rejection: 99.0%
- Minimum Salt Rejection: 98.0%
Performance is based on the following test conditions: 2,000 ppm MgSO₄, 110 psi, 77°F (25°C), 15% recovery, pH 8.0, 30 minutes operation.
Operating limits
- Typical Applied Pressure: 200 - 400 psi (14 - 28 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Maximum Operating Temperature: 113°F (45°C)
- Maximum Feed Flow: 6 GPM (1.4 m³/hr)
- Maximum Pressure Drop: 15 psi (1.0 bar) per element; 50 psi (3.4 bar) across housing
- Feedwater pH Range: 3 - 10 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed SDI (15 minutes): 5.0
- Maximum Feed Turbidity: 1 NTU
Mechanical / hydraulic
- Element Weight: 7 lbs. (3.2 kg)
- Length (A): 40.0” (1,016 mm)
- Diameter (B): 2.5” (63 mm)
- Permeate Tube (C): 0.75” (19.1 mm)
- Permeate Tube: FilmTec Style tube
- Feed Spacer: 0.031" thick diamond spacer
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.