Tóm tắt tài liệu kỹ thuật
2540-ACM5-TSF
Engineering summary from PDF text extraction for 2540-ACM5-TSF. Verify every value with the OEM datasheet.
Summary
Product Identification
- Series: 2.5" ACM-LP RO Element Series
- Core Tube Style: Filmtec Style
- Membrane Type: ACM Fully Aromatic Polyamide Advanced Composite Membrane
- Configuration: Spiral Wound, Fiberglass Outer Wrap
- Model: 2540-ACM5-TSF
Operating Limits
- Recommended Applied Pressure: 100 - 300 psi (7 - 21 bar)
- Maximum Applied Pressure: 600 psi (41 bar)
- Recommended Operating Temperature: 35 - 113°F (2 - 45°C)
- Feedwater pH Range: 2 - 11 continuous
- Chlorine Tolerance: <0.1 ppm
- Maximum Feed Flow: 6 GPM (1.4 m³/hr)
- Minimum Brine Flow/Permeate Flow Ratio: 5:1
- Maximum SDI (15 minutes): 5.0
- Maximum Turbidity: 1 NTU
Feed Water
Performance is based on the following test conditions:
- NaCl Concentration: 2,000.0 ppm
- Applied Pressure: 150.0 psi
- Temperature: 25°C
- Recovery: 15%
- pH: 8.0
- Operation Duration: 30 minutes
Product Water
- Permeate Flow: 800 GPD (3.0 m³/day)
- Average Salt Rejection: 97.50%
- Minimum Salt Rejection: 98.50%
Mechanical / Hydraulic
- Element Weight: 7 lbs (3.2 kg)
- Length (A): 40.0 inches (1,016 mm)
- Diameter (B): 2.5 inches (63 mm)
- Permeate Tube (C): 0.75 inches (19.1 mm)
- Active Membrane Area: 26 ft² (2.4 m²)
- Feed Spacer: 0.031" thick diamond spacer
Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions found in the official PDF datasheet. Contractual data should always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.